Eļļa parketa un koka grīdām Livos KOIMOS Nr. 208-101, tonis MELNS, 10 litri


289.00 €

Izvēlieties valsti
Cena289.00 €/gab
Pieejamais daudzums
Kods 208-101-10
Tilpums 10 litri
Pielietojums parketa un koka grīdām
Tonis melns
Ražotājs Livos
Virsmas efekts matēts



Technical information

Application range

For interior use on floors, solid wood, e.g. parquet or floorboards. Only suitable to a limited extent for diningtables and kitchen countertops.

Technical qualities

For an especially intensive coloration with one application. The color light preserves the natural color of the wood, by e.g. pine, cherry, and beech.

Full declaration

According to color tone: Linseed oil, wood oil, castor oil - natural resin ester, micronized wax, linseed oil - stand oil - natural resin ester, mineral pigments, titan dioxide, alumina, isoaliphates, zinc carbonate, silicic acid, linseed oil -wood oil - stand oil, linseed oil - stand oil, pine oil, citron oil, castor oil - stand oil, orange oil, dehydrated amino sugar, ethanol, chalk, soy lecithin and drying agents free of lead (Ca, Co, Mn, Zr).

Application method

Stir thoroughly before use. Remove possible skin formed on surface. Always do a test application first! With a spatula for manual application, or with a roller coater for industrial application.


Determine the exact amount needed by doing a test application.
1st coat: 
Manual application: 18 - 32 g/m², i.e. 1 liter (1.06 quart) is sufficient for approximately 31-55 m² (333 - 592 ft²)
Industrial application: 12 - 32 g/m², i.e. 1 liter (1.06 quart) is sufficient for approximately 31-83 m² (333 - 893 ft²)


Clean equipment immediately after use with SVALOS Thinner No. 292, which can also be used to clean the roller coater.

Safety advice

Always be sure to store and then dispose of cleaning cloths, polishing pads, sponges, etc. that are still wet or even slightly moist with KOIMOS High Solid Floor Oil No. 208 in an airtight metal container or in water, as there is a danger of spontaneous combustion caused by the plant oil content.

Final coat

By making economical dosage (max. 5 g /m²). For this, distribute the oil (e.g. KUNOS Natural Oil Sealer No. 244) drop by drop on the first or the second coat, spread it and polish in immediately and evenly with a single disc rotary machine and a felt pad.

Saistītās preces

Saistītās preces

Uzdot jautājumu

Nosūtīt jautājumu